• Advertisement

trouble inserting barrell on remington 1100

Moderators: MikeD, TuJays

User avatar
Moderator
Posts: 282
Joined: Mon Oct 10, 2011 8:26 am
PostPosted: Wed May 03, 2017 7:50 am
jmwhoric wrote:decided to send my gun to an authorized Remington repair shop in Paducah Ky. They gave me an estimate of $70 to fix problem. We will see.


I'm glad you are going that route, and hope they stick with their quote.

Please let us know when you get it back!
An ATI stock set on a 1955 16-ga Wingmaster would make Baby Jesus cry...........

Cop
Reloader and Bullet Caster
US Army Veteran

.22LR
Posts: 34
Joined: Thu Apr 13, 2017 1:23 am
Location: Lancashire UK
PostPosted: Sat Aug 26, 2017 6:58 am
Any outcome?
User avatar
Moderator
Posts: 4832
Joined: Mon Jul 11, 2011 6:08 am
Location: PENNSYLVANIA
PostPosted: Sat Aug 26, 2017 10:42 am
+1..........
Image

.22LR
Posts: 19
Joined: Fri Sep 16, 2016 8:58 am
PostPosted: Wed Nov 15, 2017 6:30 pm
I have the same problem with my 1100 12 gauge. The barrel won't budge. I have to use a hard rubber hammer and tap the gas chamber to get it to move. Then I have to use the same hammer to get the barrel back on. I've cleaned and cleaned and cleaned, as well as using oiled 0000 steel wool to polish the barrel tang and inside the receiver. The barrel tang inserts easily, but as soon as the round portion of the barrel where the extractor cut is enters the receiver, the barrel jams. It won't go in another 1/4 inch without using the hammer. Having a tight barrel isn't that much of a problem unless you have to field strip it to fix a jam. I may also have to send it to Remington to get it fixed. I have a 1100 LT20 and that barrel goes on and off easily. Just something out of tolerance in the 12 gauge gun I guess.

Rod
Previous

Return to Remington Model 1100

Who is online

Users browsing this forum: No registered users and 0 guests

  • Advertisement